Service And Customer Care - Kenwood BL730 Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
cleaning
Always switch off, unplug and
dismantle before cleaning.
Never let the power unit, cord or
plug get wet.
Empty the goblet before unscrewing
it from the blade unit.
The goblet can be washed in your
dishwasher.
power unit
Wipe with a damp cloth, then dry.
Wrap excess cord around the
bottom of the power unit
blade unit
1 Remove the blade unit from out of
the base by pushing up from
underneath.
2 Remove and wash the sealing ring.
3 Don't touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don't immerse the blade
unit in water.
lid
Remove the seal using the tab
before cleaning the lid.
Wash both parts by hand, then dry.
other parts
Wash by hand, then dry.
auto clean (P)
1 Pour 500ml warm soapy water in the
blender.
2 Auto clean using the pulse (P)
setting.
3 Rinse, then dismantle and clean the
blades as recommended under
"blade unit".
4 Dry the parts thoroughly.
service and customer
care
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
using your machine or
servicing, spare parts or repairs
Contact the shop where you bought
your machine.
.
4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bl720 serieBl721

Tabla de contenido