Mopar 82212323 Manual De Instrucciones página 5

22. Raise and support the vehicle.
23. Remove the four push pin fasteners (1) that secure
the LH side of the front belly pan (2). Repeat for the
three push pin fasteners on the RH side.
24. Remove the eight screws (2) that secure the front belly
pan (1) to the fascia.
25. Remove the 2 bolts (4) that secure the front belly pan
(1) (and rear belly pan) to the crossmember.
26. Remove the three push pin fasteners (3) and remove
the front belly pan.
NOTE: The Dodge has only three tabs on the front
bumper trim (fog lamp) bezels.
27. Remove both front bumper trim (fog lamp) bezels (1)
by releasing the four tabs (2) and pulling from outside
the bumper fascia.
28. Position the new fog lamp bezels and seat the retain­
ing tabs by firmly pushing into the fascia. Make sure
all tabs seat properly.
Nov 24, 2010
5
K6861133