Using The Remote Control In Bluetooth - essentiel b MS-E-500-D Manual De Utilización

display. Press the and buttons to select the desired memory number. Press the
to confirm the programming of the DAB station.
Repeat as often as necessary.
3.
The programmed stations remain stored even after switching off the device.
•
Programming a new station under an already assigned number automatically erases the previously
•
saved station.
You can program up to 30 radio stations.
•
Listening to a stored DAB radio station
Use the MEM/FOLD±10 button on the remote control to select the memory number of your choice
•
(1 to 30) and listen to the stored radio station.
Displaying DAB information
In DAB+ mode, the micro hi-fi system displays information about the station being played. In addition
•
to the current time, this includes the name of the selected radio station as well as other information
transmitted by the secondary DLS (Dynamic Label Segment) of the transmitter. This may, for example,
be the title and name of the artist or contact information or additional information provided by the
transmitter.
When the information is longer than 16 characters, it is displayed as scrolling text.
•
By pressing the INFO/MENU button several times, you can scroll through the Info menu and view all
•
the information available (program type (PTY), station name, channel and frequency, signal error rate,
bit rate and audio type, DLS text information, DL Plus info (if available), time, date, signal strength).
Accessing the configuration menus
Press and hold the INFO/MENU button, and then select the
knob or the et buttons on the remote control. Press the
Press the and buttons to scroll through the various options, and then press the
to confirm.
reset : Select y to reset all of your micro hi-fi system's settings to the original factory settings.
»
The list of available stations will also be erased and the preset memories will be erased. After the
factory reset, the micro hi-fi system will start a new automatic scan and update the station list.
sW ver : This option displays the version number of the software installed on your micro hi-fi
»
system.
38
V.1.0
button
Stored appears on the display.
system menu with the unit's TUNING
button to confirm.
button
language : Select the language of your choice from the various options available by turning the
»
setting knob to the right or left. Press the
connecting via Bluetooth*
If you have a Bluetooth * audio device (smartphone, tablet, laptop, etc.), you can pair it to the micro hi-
fi system. The Bluetooth * connection allows you to listen to the music recorded on your audio device
without using a cable.
Turn on the micro hi-fi system and select the BT source by repeatedly pressing the SOURCE button
on the remote control or the unit.
On the left side of the display, a blue PAIR LED flashes on the screen, indicating that pairing mode
1.
is active.
Then please refer to the operating instructions for your Bluetooth
2.
system. It is called Essb_MS-E-500-D in the list of detected Bluetooth
Pairing is successful when the blue PAIR LED becomes steady on the front panel.
3.
Start playback on your audio source.
4.
To pause playback, press the button on the micro hi-fi system, remote control or your smartphone.
5.
Or change the playback source on the micro hi-fi system or remote control.
This micro hi-fi system can be paired to all devices equipped with Bluetooth
•
After pairing, the last Bluetooth * audio device stored will automatically connect as soon as Bluetooth*
•
source is selected.
The unit can only be paired to one Bluetooth* device at a time. To pair another device, cancel the
•
Bluetooth* pairing for your device and then repeat the previous steps 1 to 4 with the new device.

Using the remote control in Bluetooth

Press this button to start playback.
•
Press a second time to pause playback.
•
Press again to resume playback.
•
Go to the next or previous track.
MEM/FOLD±10
button to confirm
audio device to pair it with the micro hi-fi
*
devices.
*
* wireless technology.
*
V.1.0
39