Ingersoll Rand 728 Serie Especificaciones Del Producto página 3

Product Safety Information
Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
●
Always use a Dead Handle with Model 728NA3 and 728N8K.
For Additional information refer to Air Drills Product Safety Information Manual
Form 04580353.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specifi cations
Type of
Models
Handle
728JA1 Pistol
728J6K Pistol
728LA2 Pistol
728L6K Pistol
728NA3 Pistol
728N8K Pistol
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air fi lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off , to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 47135736 and table on page 2. Maintenance frequency is shown in a
circular arrow and defi ned as h=hours, d=days, and m=months of actual use. Items identifi ed as:
1. Air fi lter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Offi ce or Distributor.
03527256_ed17
WARNING
Chuck Free
Capacity Speed
in (mm) rpm
5/16 (8) 3800
3/8 (10) 3800
3/8 (10) 2100
3/8 (10) 2100
1/2 (13) 950
1/2 (13) 950
Sound Level dB(A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
-- --
85 106
85 106
-- --
84 105
-- --
* K = Vibration measurement uncertainty
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - during assembly
EN
Vibration (m/s2)
(ISO28927)
) Level *K
w
3.7 0.8
3.7 0.8
3.7 0.8
3.7 0.8
3.4 0.8
3.4 0.8
EN-1