Logitech Squeezebox Duet Guia Del Usuario página 6

Logitech Squeezebox Duet
Connect the controller
1. Remove the controller from the charging station.
2. Follow the on-screen instructions displayed on the
controller's LCD. These instructions tell you how to
connect the controller to your computer network,
using the network name (SSID) and security key you
recorded in step 2.
. Once the controller is connected to your network,
it will automatically look for the receiver so you
can set the receiver up. You should see the screen
shown here.
The number on the controller's LCD screen is the MAC
address (unique network address) of your receiver.
You may confirm this by looking at the label on
the bottom of the receiver where the MAC address is printed.
10 English
Set up the receiver
1. Press the Center button on the controller. After a few moments, the LED
on the receiver should change colors. (These colors indicate different steps in
the configuration and connection process. A complete list of the colors can be found
in the Squeezebox Duet User Guide.)
2. On the controller's LCD, your are asked to select a music source. Unless you have
multiple instances of SqueezeCenter running on your network, you should see just
one local music source listed, along with SqueezeNetwork.
. Scroll to your listed music source using the controller's Scroll Wheel, and press
the Center button to select your music source. The LED on the receiver should
change to white.
Tip If you do not see a local music source and your are sure SqueezeCenter
is installed and running, you may have a firewall that is blocking access.
For assistance, refer to the Troubleshooting section in the Squeezebox Duet
User Guide or go on-line at www.logitech.com/support. Click the Troubleshooting
button, select the wireless music systems, and follow the on-screen instructions.
User's Guide
English 11