Simu T5 E Manual Del Usuario página 3

GB
S.A.S. au capital de 5 000 000 - Z.I. Les Giranaux - BP71 - 70103 Arc-Les-Gray CEDEX - RCS GRAY B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090
1
Installation
- Drilling of the tube:
- Assembly :
1
2
Adjustment of End limits
- During the End limits adjustment, there is a one-second delay in motor operation.
2.1- Connect the motor to the settings switch (réf.:
2006024). This switch is specific to T5E / T5E SP motors.
Do not under any circumstances use it with another
motor!
2.2- Check the rotation direction:
- Connect the switch to the mains, then press s :
a- If the tube turns in the "up" direction, go to step 2.3.
b- If the tube turns in the "down" direction, invert the Brown(2)
and Black (3) wires on the motor, and repeat the test.
2.3- Opening of the End limit switch setting mode:
- Press simultaneously on s and t for 3 seconds. The motor will run briefly in one direction and
then in the in the other*. Go to step 2.4.
2.4- Initializing obstacle detection:
- Press on s for 3 seconds. The motor will run briefly in one direction and then in the other*. Go to
step 2.5.
2.5- Adjustment of down end limit:
The use of rigid link (VAR or VAS) allows an automatic adjustment of the Down
end limit in accordance with the blocking provided by the rigid link. If you use
it, go directly to step 2.6, otherwise proceed to the following operations:
a- Position the motor on the desired down end limit using the s and t keys.
b- To memorize the down end limit, press s twice, as folow:
- 1st press: for 0,5 second without the motor rotation.
- 2nd press: over 3 seconds, so the motor rotates briefly one way, then the other*. Go to step 2.6.
* Press the buttons until the motor turns into the two directions.
T5 E - 230V - 50Hz
55
48*
* :35Nm max.
T5 E
230V-50Hz
ACIER-STEEL-STAHL-ACERO-ACCIAIO
5
2
3
L1
20
4
L2
Ø4,8 x 10
Ø5 x 10
9910013
4
9910014
25Nm max.
Blue
Brown
Black
Green/yellow
a
>>
a
>>
5013732D
Read carefully these instructions before
any use.
A
A ØB
T
(mm) (mm)
min.
47 586 5
47 660 5
2
3
1
PE
L
N
b
>>
OK
≥3s
≥3s
b
0,5s
>>
6s max.
4xØB / 90
L1 L2
(mm) (mm)
599 619
673 693
1
2
2
1
2
3
>>
>>
≥3s
+ >>
1/2