Installing The Batteries; Operating The Remote Control; Secondary Functions - Philips SBCRP520/00 Manual Del Usuario

Instructions for use
You just made a great choice by buying this Philips remote
control! It replaces all Philips TV remote controls
manufactured since 1980. Besides this it also offers access to
basic Philips VCR functionality on all Philips videorecorders.
Its capabillity to operate with the latest infrared coding
system (RC6 - used on TV's from 1999 onwards) makes this
remote control a true allround device.

Installing the batteries

Your SBC RP 520 needs two 1.5V batteries, type R06 or AA.
Do not press any buttons during battery placement since this
will delete any programmed functions!
Put the batteries in like this:
T
I P
Remember to replace the batteries at least once a year.

OPERATING THE REMOTE CONTROL

N
O T E
Not all TVs have all the features listed hereafter. Please check
the instructions for use of your TV to determine which
functions your TV has.
Most of the symbols used on this remote control are the same
as the symbols on your original remote control. The function
displayed on a button can be accessed by pressing this
button.

Secondary functions

Your remote control can perform a second set of features.
These secondary functions are displayed above the buttons.
To access these functions simply:
1
Press and hold the Shift button on the left top side of
the remote control.
2
Simultaneously press the button above which the required
function is displayed.
2