Installing The Batteries - Philips SBCRU110/38 Instrucciones De Manejo

Instructions for use
You just made a great choice by buying this Philips universal
remote control! It can operate the most-used functions of
almost any brand of TV.

Installing the batteries

Your SBC RU 110 needs two 1.5V batteries, type R03, UM4 or
AAA.
Put them in like this:
T i p
• Remember to replace the batteries at least once a year.
• Don't leave the batteries out for longer than one hour,
otherwise you will need to set-up the SBC RU110 again.
KEYS & FUNCTIONS
Power: to switch TV on and off.
Mute: to switch the TV sound on and off.
Channel Up/Down: to select next / previous channel.
Volume Up/Down: to control the TV volume.
SET-UP FOR USE
A
Carefully read the complete procedure before starting!
Your TV is a Philips brand:
– The green indicator LED lights up to confirm transmission
C
Press a few keys to check correct response.
Your TV is of another brand or your TV is a
Philips brand, but not all keys respond
correctly:
1
2
3
2
D V I C E
Press the power key to test.
H E C K
Look up the brand name of the TV you want to operate in
the code list.
Make sure the TV is switched on.
Press and hold keys mute and power simultaneously - for
about three seconds- until the green LED lights up.
(Release the keys: the green LED should stay on)