Further Individual Settings; Reset To Default Settings - STORZ & BICKEL Crafry+ Modo De Empleo

8.5 Further individual Settings

The Storz & Bickel App can be
i
used to make other useful setting
changes, such as switching the vi-
bration motor on and off, dimming
or switching off the LED display,
extending the automatic switch-off
time, locating the Vaporizer on the
App at the touch of a button and
much more. Further information on
the Storz & Bickel App can be found
at:
https://www.storz-bickel.com/eu/
eng/app/.
Wear & Tear Set - SKU 06 02 CY
The Wear & Tear Set contains all spare parts required to replace the Cooling Unit.
Cooling Unit Set - SKU 03 05 CY /
Cooling Unit - SKU 03 04 CY
Replace the Cooling Unit regularly to ensure cleanliness.
Mouthpiece Set - SKU 11 11
The Set includes 4 Mouthpieces for the Cooling Unit.
Screen Set, small - SKU 11 12
The Set contains 4 Screens with coarse mesh width for the Cooling Unit and 2
Screens with normal mesh width for the Filling Chamber.
Coarse Screen Set, small - SKU 11 40
The Set includes 6 coarse mesh Screens for the Cooling Unit.
Normal Screen Set, small - SKU 11 03
The Set includes 4 normal mesh Screens for the Filling Chamber.
Drip Pad Set, small - SKU 11 02
If the Filling Chamber is partially filled, place the supplied Drip Pad over the herbs to
prevent the vaporization material from slipping.
8 S T O R Z & B I C K E L A P P
9 O P T I O N A L A C C E S S O R I E S
8.6 Reset to Default Settings
Settings which you have changed via
the Storz & Bickel App can be reset as
follows:
X Switch on the Vaporizer.
X Press the ON/OFF switch for 10 sec-
onds. The reset is acknowledged by
the following running lights: red/
green/blue/red/green/blue/red/
green/blue
vibration.
59
and simultaneous