Installation Instructions Co 0-10V Sensor; Warranty - Zehnder RF55 Manual De Instalación

The RF link to a ventilation unit
will only work if the CO
placed within range of this unit. If
several sensors are used, at least
one CO Sensor must be mounted
2
within range of the ventilation unit.
The other CO
mounted outside the range of the
ventilation unit. However, they must
be mounted within the range of the
previously installed CO
RF pairing should be within range of
the ventilation unit.
The RF repeater function does not
work during pairing.
3.4 Installation instructions CO
Sensor
When a CO
2
as a sensor, the possibility of
manually selecting ventilation modes
is disabled.
The setup of the CO
as a sensor can only be done with
the Zehnder ventilation units with
a control function, such as the
ComfoAir E or the ComfoAir Q. The
control function is missing on the
ComfoFan S.

3.5 Warranty

Zehnder offers a 24­month warranty on this
device. This period applies from the date of
installation up to a maximum of 30 months
after the production date of the device.
Sensor is
2
Sensors can be
2
Sensor. The
2
0-10V
2
0­10V Sensor is set up
0­10V Sensor
2
The warranty is void if:
■ a defect is the result of inexpert or
careless use of the device;
■ a defect resulting from contaminating the
device;
■ p arts from another manufacturer have
been used;
■ r epairs have been carried out by
unauthorised persons.
Not covered by the warranty:
■ c osts for disassembly and assembly
on­site;
■ w ear and tear from normal use.
33 - EN