Tabla de contenido
Publicidad
GB
Contents
These instructions apply to CEMO - CUBE-Tanks
in accordance with
National Technical Approval Z-40.21-510
1. General
1.1 Applicable documents
• Approval notification for CUBE-Tank
(operator extract)
• Operating instructions for delivery systems
(e.g. pumps and counters) of the accessory
manufacturers
• Operating instructions for overfill protection
mechanism (limiting value transmitter)
• Operating instructions for the leak detector
Furthermore, the provisions of water,
industrial and construction law are also be
complied with.
1.2 Application
CUBE-Tanks are factory-produced contain-
ers with a capacity of 1000 l, 1500 l and
2500 l, which consist of an approximately
cube-shaped internal tank made in a rotation
moulding process and a surrounding outer
container, which serves as a collection tray,
and together form a container combination
made from polyethylene (LLD-PE).
The CUBE-Tanks are intended for the non-
pressurised storage of:
26
• EL heating oil
• Diesel fuel
Page 26
• Biodiesel
Page 26
• Lubricants
Page 26
• Pure urea solutions 32.5 % (e.g. AdBlue
Page 27
Page 27
Page 27
The permissible operating temperature is
40 °C.
Page 28
The CUBE-Tanks are factory-fitted with a
Page 28
filling and ventilating connection as well as
Page 28
a delivery system (pump, delivery hose and
delivery nozzle), a level indicator and a leak
Page 29
detector.
Page 30
Page 86
The installation conditions for the respective
media can be found in the water, industrial
and construction regulations.
The containers may only be placed in rooms
within buildings and outdoors, but not in
areas subject to risk of explosion in Zones 0
and 1. In high-water or flood areas, the con-
tainers must be positioned where they cannot
be flooded.
Before beginning to use the tank, the opera-
tor must affix a sign that identifies the stored
liquid, its density and concentration.
3. Transport
The CUBE-Tanks are dispatched packed in a
protective film on a transport pallet in order to
protect against mechanical damage.
The following must be complied with in order
to avoid damage and to uphold any claims
under warranty:
• Transport and storage ONLY in the original
• Do not throw the tank or let it fall
• Do not place on edges or sharp objects
• Only remove the transport packaging at the
Nevertheless, should the tank suffer any
damage, please contact our customer ser-
vices!
and other stored media in accordance with
packaging
place of installation
)
®
Publicidad
Capítulos
Tabla de contenido
