Sony AC-80MD Manual De Instrucciones página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
For the customers in Canada
CAN ICES-3 (B)/NMB-3(B)
This unit has been certified according to
Standard CAN/CSA-C22.2 No.60601-1.
For the customers in the U.S.A. and
Canada
Model AC-80MD is Non-Patient
Equipment.
This unit can not be used in the vicinity of
patients.
* Patient Vicinity
Important safeguards/notices for use
in the medical environments
1. All the equipments connected to this
unit shall be certified according to
Standard IEC60601-1, IEC60950-1,
IEC60065 or other IEC/ISO Standards
applicable to the equipments.
2. Furthermore all configurations shall
comply with the system standard IEC
60601-1-1. Everybody who connects
additional equipment to the signal
input part or signal output part
configures a medical system, and is
therefore, responsible that the system
complies with the requirements of the
system standard IEC60601-1-1. If in
doubt, consult the qualified service
personnel.
This unit can not be used in the patient
environment.
* Patient Environment
3. Do not touch the patient
simultaneously while you are
contacting with this equipment.
4. For this particular equipment, all
accessory equipment connected as
noted above, must be connected to
mains via an additional isolation
transformer conforming with the
construction requirements of
IEC60601-1 and providing at least
Basic Insulation.
5. The leakage current could increase
when connected to other equipment.
6. This equipment generates, uses, and
can radiate radio frequency energy. If
it is not installed and used in
accordance with the instruction
manual, it may cause interference to
other equipment. If this unit causes
interference (which can be determined
by unplugging the power cord from
the unit), try these measures: Relocate
the unit with respect to the susceptible
equipment. Plug this unit and the
GB
3
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido