Led Indication - Hobot 388 Manual Del Usuario

Auto Cleaning: up then down
◎App Instructions
HOBOT-388 can be controlled by both the equipped remote control and HOBOT
App via Bluetooth.
1. Download and Install HOBOT App
Scan QR code or search "HOBOT" on the App Store or
Google Play to download HOBOT app on your
smartphone or tablet.
2. Start Cleaning with HOBOT App
(3) Turn on Bluetooth and tap open HOBOT App.
(4) Turn on HOBOT and wait for "Connected" shown on HOBOT App.

◎LED Indication

Status LED indication
Orange light on
Charing
Green light on
White and blue light
flashing
Blue light on
White light on
White light flash once
Blue/White light on
Light is off
Operating
Red and blue light
flashing
Blue light flashing
White light flashing
Red light flashing
Auto Cleaning: left then down
Alert Situation and handling
none UPS charging.
none UPS fully charged.
Low UPS battery, please refer to
none
FAQ Q1 to resolve.
none Cleaning without water spray.
none Cleaning with water spray.
none Spraying water.
One long and
Cleaning completed.
two short beeps
One beep Air leakage, HOBOT will reverse.
Power disrupted, please reconnect
to the power source. In case there's
Continuous
power outage or unable to
alert
re-establish the power source,
please refer to FAQ Q2 to resolve.
Two beeps Please refer to FAQ Q3 to resolve.
Please refer to FAQ Q7 and Q8 to
Two beeps
resolve.
Hardware failure. Please contact a
Two beeps local retailer or an authorized dealer
for repairs.
- 21 -
Auto Cleaning: right then down
SmartBot HOBOT – www.hobot.es