IKEA TRADFRI E1706 Manual Del Usuario página 4

ENGLISH
PAIRING A STEERING DEVICE TO YOUR
CONTROL OUTLET
When the control outlet is sold together with a
wireless ON/OFF switch (in the same package),
they are already paired.
To add more control outlets, just repeat the steps
below:
1 Make sure that your control outlet is plugged in
and the main power is turned on.
2 Hold the steering device close to the control
outlet you want to add (no more than 5 cm
away).
3 Press and hold the pairing button
10 seconds , you can find the pairing button
under the rear cover.
A red light will shine steadily on the ON/OFF
switch. On your control outlet a white light will
begin to dim and flash one time to indicate that
it has been successfully paired.
Up to 10 control outlets can be paired with 1 ON/
OFF switch.
Make sure to pair them one at a time. If the control
outlets are close to each other, disconnect those
that have already been paired from the wall outlet.
FACTORY RESET YOUR DEVICE
For control outlet:
Push a pin into the pinhole on bottom of the
control outlet for at least 5 seconds.
for at least
4