Dedicated Micros 2010 Manual De Instalación página 7

2010_2015_completeREV5.qxp
5. Mounting Configuration - 2015
Fig. 4 Mounting configuration
E
A
C
Enclosure mounting
1. Use bracket arm (E) as a template for marking the position of mounting holes. Remove & drill to
pattern required.
2. Attach bracket arm to wall using rawl plugs and screws provided. ( Assuming masonary wall )
3. Feed cables through bracket exiting down (C) or through (A) wall, via conduit, as req'd. (fig 4)
4. Release screw (F) to pan housing and screw (H) for tilt. Position as required for camera
coverage & tighten to secure.
5. An optional Infra red lamp ( 880/883) may be mounted under the housing.
Note: When the IR lamp is used an additional extender bracket 94045 is required.
2010/2015 Installation Manual
22/9/09 2:25 pm Page 5
Model Shown: 2015
H
Option ( 2015 only)
F
Page. 5