ECRON FS40 8JB Manual De Usuario página 34

BASE MOUNTING
INSTRUCTIONS
1. Unpack the box and ensure that
all of the parts listed are included.
2. Loosen the 4 screws located
around the centre of the base. Fit
the tube over the base, lining up
the holes and tightening the
screws so that the base fits in
correctly (Fig. 1).
3. Loosen the height adjustment
ring located on the upper part of
the tube (Fig. 2).
4. To attach the cover to the
base, move it through the outer
tube (Fig. 3).
5. Refit the height adjustment ring
into its original position (Fig. 4).
6. Adjust the height of the inner
tube, sliding it upwards or
downwards through the outer
tube. Once the desired height is
reached, tighten the height
adjustment ring (Fig. 5).
7. To fit the head of the fan onto
the inner tube, loosen the
adjustment screw located in the
lower part of the head.
34
8. Fit the head of the fan into the
inner tube, line up the hole with the
slot of the inner tube and tighten
the adjustment screw (Fig. 6).