Cleaning And Maintenance Instructions - ECRON FS40 8JB Manual De Usuario

USER INSTRUCTIONS
Speed control
The speed can be selected using
the buttons on the control panel:
0 = Off
1 = Low speed
2 = Medium speed
3 = High speed
Swing button
To start the fan's horizontal swing,
press the swing button located on
the back of the fan head. To select
a direction, pull the switch
when the fan is pointed in the
desired direction.
Adjusting the tilt
To adjust the air flow upwards,
push the grille gently in the
desired direction.
Adjusting the height
To adjust the height of the fan
base, loosen the height
adjustment ring in the upper part
of the outer tube and slide the
inner tube to the desired position.
Tighten the adjustment ring to fix
the position (Fig. 5).
CLEANING AND
MAINTENANCE
INSTRUCTIONS
Unplug the device from the mains
supply before doing any cleaning.
Clean the fan thoroughly and
put it back in its plastic bag
before storing.
Ensure that you clean the body of
the fan periodically using a soft
damp cloth and soapy water. Use
a hoover to clean the grilles. Never
remove the fan.
Do not use corrosive chemicals,
solvents, strong detergents or
sharp objects (such as knives or
pointed objects) to clean the
device. Ensure that no water or
other liquid gets into the motor
interior. Do not submerge the
motor in liquid.
Store the fan in a dry place
away from humidity during the
winter months.
EN
37