AirMan ResQTech Manual Del Usuario página 25

This plant / machine
Brand: AirMan® by Active Tools
Type/model: ResQTech Tire Repair Kit / 71-075
has been developed, designed and manufactured in accordance with the CE directives
machines 2006/42/CE and electromagnetic compatibility 2004/108/CE
under the sole responsibility of
active tools Europe GmbH
Otto-Hahn-Str. 72
D - 32108 Bad Salzuflen
Germany
The following harmonized standards have been applied:
IEC 61000-1:2005, IEC 61000-2:2005, EN ISO 12100-1:2009, EN 1012-1:2010, EN 894-1:2008, EN 894-2:2008, EN 55014-1:2011,
EN 55014-2:2008
The relevant safety and health protection requirements for the construction and manufacture of machines according to annex I of the
machinery directive have been met.
If the machine/plant is changed without active tools Europe GmbH's consent after handover this declaration will become void.
Person responsible for the composition of the technical records, CE commissioner
Date, Signatory and information regarding signatory
WARRANTY
Manufacturer's liability is limited to product replacement with proof
of Purchase by Active Tools. Active Tools warrants that their AirMan®
Compressors/Inflators will be free for defects in material and
workmanship, under normal use, for 9 years from the date of retail
purchase. The limited warranty does not apply in the event of damage
caused by abuse, misuse, or other external causes to the products.
Active Tools reserves the right to substitute products of equal or
greater value if identical products are not available. This limited
warranty is non-transferable.
CE Declaration of Conformity
Signature
In accordance with the law, electric tools that have reached the
end of their life must be collected separately and returned to an
environmentally compatible recycling facility.
REPLACEMENT OF SEALANT BOTTLE
If medical advice is needed, have product container or label at
hand.
Keep out of reach of children.
Wear protective gloves/protective clothing/eye protection/face
protection.
If on skin: wash with plenty of soap and water
If skin irritation or rash occurs: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
If in eyes: rinse cautiously with water for several minutes. Remove
contact lens, if present and easy to do. Continue rinsing.
Dispose of contents/ container to hazardous or special waste
collection point.
REMOVE
1. Push in and rotate bottle counter-clockwise.
2. Remove the empty bottle
INSTALL
1. Install the new sealant bottle
2. Push in and rotate bottle clockwise fully until it stops
25
en
440ml
Danger! Contains latex.
May cause an allergic skin reaction