Tabla de contenido
Publicidad
PORTERO DIGITAL - DIGITAL DOOR ENTRY SYSTEMS - PORTIER NUMÉRIQUE
VERIFICACIÓN DE LA INSTALACIÓN
TROUBLE SHOOTING
Make sure that the entrance panels of the
installation are correctly configured. To do so,
check that the value selected in position 8 of the
configuration menu is the same as that shown
on pages 16, 18 or 22, depending on the
installation which is being performed. For the
remaining positions, consult the data sheet of
the entrance panel audio unit.
Ensure that the AIB-001 accessories are correctly
configured. To do so, make sure that the
configuration of these devices is the same as
that shown on pages 16, 18 or 22, depending
on the installation which is being performed.
Check that the codes assigned to the
telephones/connection brackets on each of the
floors is the same as one of the values suggested
on pages 16, 18 or 22, depending on the
installation which is being performed.
No es posible establecer comunicación
d e s d e l o s t e l é f o n o s / m o n i t o r e s
(programación de los teléfonos/soportes
d e
c o n e x i o n e s ,
teléfonos/monitores desde placa de calle,
autoencendido, llamada a conserje desde
viviendas)
It is impossible to establish communication
f r o m
t h e
t e l e p h o n e s / m o n i t o r s
( p r o g r a m m i n g
telephones/connection brackets, call to
telephones/monitors from the entrance
panel, auto switch-on feature, call to the
c o n c i e r g e d e s k f r o m d w e l l i n g s )
Check connections I2, I1 of the accessory
to the device supplying power to it (ALC-
070 or GCI-001). Check the connection of
I1
to I1
in the accessory. Check that
the voltage in terminals I2
terminals I2
, I1
the same as the values shown on page 28.
Check connections D1, D2
accessory to the audio unit and connections
D1, D2
to the telephones/connection
brackets.
If no fault is detected, there may be a problem
with the accessory.
l l a m a d a
o f
t h e
, I1
and in
, of the accessory are
of the
a
Publicidad
Tabla de contenido
