CARE ERGOS V Manual Del Usuario página 20

Press the MODE key
" Time" flashes , Press the UP or DOWN key
Press the MODE key
"Distance" flashes , Press the UP or DOWN key
Press the MODE key
"Kilojoule" flashes, Press the UP or DOWN key
Press the MODE key
"Pluse" flashes , Press the UP or DOWN key
Press the MODE key
Start Pedaling to start Workout. The resistance could not be adjusted by Press the UP or DOWN key during
workout.
WATT Program
Selecting "WATT " pressing the WATT PROGRAM key then pressing the MODE key. The text window will
display "SELECT WATT" 3 seconds, Meanwhile "20" will flash.Selecting WATT value from 20 W to use the UP
or DOWN key then pressing the MODE key to confirm.
Setting Parameters for WATT
st
After that 1 parameter "Time" will flash so value can be adjusted using the UP or DOWN keyPress the MODE
key to save value & move to next parameter to be adjusted. Continue through all desired parameters, start
pedaling to begin workout.
"WATT" Operating Instructions
Press the WATT PROGRAM key (Select Interval Mode using the WATT PROGRAM Key)
Press the MODE key or Start Pedaling to start workout.