Conformity And Certifications; Communication - LEGRAND IME IF96014 Guia De Inicio Rapido

RS485 communication interface
BTL - certified BACNET protocol

6. CONFORMITY AND CERTIFICATIONS

In compliance with the standards:
- Conformity with the provisions of the European Directive on electromagnetic compatibility (EMC) No. 2014/30/EU
- Conformity with the low-voltage Directive No. 2014/35/EU, EN61020-1.
Respecting the environment – Conformity with the CEE directives:
- Compliance with Directive 2011/65/EU amended by Directive 2015/863 (RoHS 2), on the restriction of the use of certain hazardous
substances in electrical and electronic equipment, such as lead, mercury, cadmium, hexavalent chromium, brominated flame retardants,
polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE)
- Compliance with directive 91/338 / EEC dated 18/06/91 and with decree 94-647 dated 27/07/04
- Conformity with the REACH regulation
Plastic materials:
- Halogen-free plastic materials.
- Part marking according to standards ISO 11469 and ISO 1043.
Packagings:
- Packaging designed and produced in accordance with Decree 98-638 of 20.07.98 and directive 94/62/CE

7.COMMUNICATION

Modbus RS485 wiring diagram, BACNET protocol:
PLC
Required use of Belden
RS485:
(1)
for a maximum length 50 m
Resistance not furnished supplied to be connected between "+ and -" of the 1
(2)
Communication tables
- BACNET communication protocol is available at http://www.imeitaly.com,
Technical data sheet: IDP000366EN_01
RS-485
*
+ – GND
9842, Belden 3106A (or equivalent) for a maximum length of 1000 m, or Category 6 cable (FTP or UTP)
Code: IF96014
NEMO 96HD
N°1
GND
+ –
and last device of the line
st
entering code "IF96014" in the search field.
Updated: -
NEMO 96HD+
N°2
R
GND
+ –
T
Created: 30/07/2020
NEMO 96HDLe
N°n
*
GND
+ –
3 / 3