Galletti MYCOMFORT BASE Manual Del Usuario página 17

MYCOMFORT BASE
AVAILABLE CONFIGURATIONS (PARAMETER P00)
025
> System pipes: 4
> Valve: 2-3 WAYS
> Heating element: NO
> Fan speed: 3
> Summer/winter switching logic: LOCAL MANUAL
026
> System pipes: 4
> Valve: 2-3 WAYS
> Heating element: NO
> Fan speed: 3
> Summer/winter switching logic: REMOTE MANUAL
027
> System pipes: 4
> Valve: 2-3 WAYS
> Heating element: NO
> Fan speed: 3
> Summer/winter switching logic: AUTOMATIC AIR SIDE
028
> System pipes: 4
> Valve: 2-3 WAYS
> Heating element: NO
> Fan speed: 3 + CN (NATURAL CONVECTION)
> Summer/winter switching logic: LOCAL MANUAL
029
> System pipes: 4
> Valve: 2-3 ways
> Heating element: NO
> Fan speed: 3 + CN (NATURAL CONVECTION)
> Summer/winter switching logic: REMOTE MANUAL
030
> System pipes: 4
> Valve: 2-3 WAYS
> Heating element: NO
> Fan speed: 3 + CN (NATURAL CONVECTION)
> Summer/winter switching logic: AUTOMATIC AIR SIDE
031
> System pipes: 4
> Valve: NO
> Heating element: YES
> Fan speed: 3
> Summer/winter switching logic: LOCAL MANUAL
È severamente vietata la riproduzione anche parziale di questo manuale / All copying, even partial, of this manual is strictly forbidden
LOGICS
COOLING/HEATING SWITCHING
Four logics are present to select the thermostat operating modes according to
the controller configuration setting:
> Local manual: user choice made through the key
> Remote manual: depending on the Digital Input 1 status (contact logic:
see configuration parameters of board)
> Automatic, depending on water temperature
Summer
NB: in case of water sensor alarm, the controller returns to the Local
mode temporarily.
> Automatic, depending on air temperature
Winter
Where:
- Set is the temperature setting made by the arrows
- ZN is the neutral zone (parameter P03)
The thermostat operating mode is indicated on the display by the symbols
(cooling) and (heating).
17
Winter
Water temp.
Summer
Air temp.
FC66002571 - rev. 02
G B