Publicidad
Idiomas disponibles
Idiomas disponibles
My Weather+ is not working.
EN
•
Make sure the battery is correctly inserted. Follow the pairing instructions correctly.
•
Press
I cannot pair with my Weather
•
Ensure Bluetooth is activated on your smart device.
Ensure the Weather
•
range. Place your smart device closer if there are physical obstacles such as a thick wall
or large pieces of furniture interfering with the transmission.
•
Wait for several seconds for the eligible Weather
iOS devices user, pull the screens down to refresh.
I cannot retrieve all data from the Weather
Weather
Weather
Make sure you keep your smart device connected to the Weather
data.
The live data does not refresh.
Check if the Weather
•
range. Place your smart device closer if there are physical obstacles such as a thick wall
or large pieces of furniture interfering with the transmission.
•
The Weather
pressing
If you have pressed
•
When pairing more than one Weather
•
interference.
If the problem persists:
•
to reset the device to default, then pair with the smart device again.
+
.
+
and your smart device are within 30 m (98 ft) Bluetooth operation
+
stores the weather data up to 20 days. If your smart device disconnects from the
+
for more than 20 days, the app could only retrieve the data from the last 20 days.
+
and your smart device are within 30 m (98 ft) Bluetooth operation
+
may take up to one (1) minute for the live data to appear on the app after
, depending on number of sensors you have paired.
once, wait for 15 seconds before pressing again.
o Turn off the app (running or in background) and then turn on again.
o Turn off the Bluetooth on your smart device and then turn on again.
o If the problem persists after above solution, please press the Weather
for two (2) seconds to enter pairing mode again.
+
displays on the searching screen. For
+
.
+
in order to receive the
+
, place each device as far as possible to avoid
+
device
2016 . 02 . 16
Publicidad
