Oregon Scientific Weather+ Manual Del Usuario página 8

My Weather+ is not working.
DE
• Make sure the battery is correctly inserted. Follow the pairing instructions correctly.
Press
•
I cannot pair with my Weather
• Ensure Bluetooth is activated on your smart device.
Ensure the Weather
•
Place your smart device closer if there are physical obstacles such as a thick wall or large pieces
of furniture interfering with the transmission.
• Wait for several seconds for the eligible Weather
devices user, pull the screens down to refresh.
I cannot retrieve all data from the Weather
Weather +
for more than 20 days, the app could only retrieve the data from the last 20 days. Make sure you
keep your smart device connected to the Weather
The live data does not refresh.
• Check if the Weather
Place your smart device closer if there are physical obstacles such as a thick wall or large pieces
of furniture interfering with the transmission.
• The Weather
pressing
If you have pressed
•
• When pairing more than one Weather
• If the problem persists:
o Turn off the app (running or in background) and then turn on again.
o Turn off the Bluetooth on your smart device and then turn on again.
o If the problem persists after above solution, please press the Weather
to reset the device to default, then pair with the smart device again.
+ .
+ and your smart device are within 30 m (98 ft) Bluetooth operation range.
stores the weather data up to 20 days. If your smart device disconnects from the Weather
+ and your smart device are within 30 m (98 ft) Bluetooth operation range.
+ may take up to one (1) minute for the live data to appear on the app after
, depending on number of sensors you have paired.
once, wait for 15 seconds before pressing again.
(2) seconds to enter pairing mode again.
+ displays on the searching screen. For iOS
+ .
+ in order to receive the data.
+ , place each device as far as possible to avoid interference.
+
+ device for two
2016 . 02 . 16