Technical Data; Noise/Vibration Information - BTI EX 150 Manual Original

(8) Sanding pad
(9) Handle (insulated gripping surface)
(10) Sanding sheet A)
(11) Screw for sanding pad
(12) Extraction outlet
(13) Dust extraction hose A)
A) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.

Technical Data

English
Random orbit sander
Article number
Sanding pad included
with product
Orbital stroke rate
preselection
Rated power input
No-load speed n
0
No-load orbital stroke
rate
Orbit diameter
Weight according to
EPTA-Procedure
01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V.
These specifications may vary at different voltages and in
country-specific models.

Noise/Vibration Information

Noise emission values determined according to
EN 62841-2-4.
Typically the A-weighted noise level of the power
tool are: 81 dB(A); sound power level 92 dB(A).
Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and un-
h
certainty K determined according to
EN 62841-2-4:
a < 2.5 m/s 2 , K = 1.5 m/s 2
h
The vibration level and noise emission value given
in these instructions have been measured in ac-
cordance with a standardised measuring proced-
ure and may be used to compare power tools.
They may also be used for a preliminary estima-
tion of vibration and noise emissions.
The stated vibration level and noise emission
value represent the main applications of the
power tool. However, if the power tool is used for
other applications, with different application tools
or is poorly maintained, the vibration level and
noise emission value may differ. This may signific-
1 609 92A 5NR • 25.6.20
EX 150
9 096 523
●
●
W 400
min -1 5500–12000
-1
min 11000–24000
mm 4
kg 2.4
/ II
English
,
antly increase the vibration and noise emissions
over the total working period.
To estimate vibration and noise emissions accur-
ately, the times when the tool is switched off or
when it is running but not actually being used
should also be taken into account. This may signi-
ficantly reduce vibration and noise emissions over
the total working period.
Implement additional safety measures to protect
the operator from the effects of vibration, such as
servicing the power tool and application tools,
keeping their hands warm, and organising work-
flows correctly.
Assembly
English
Pull the plug out of the socket before carry-
u
ing out any work on the power tool.
Changing the Sanding Sheet
To remove the sanding sheet (10), lift it from the
side and pull it from the sanding pad (8).
Remove dirt and dust from the sanding pad (8),
e.g. with a paintbrush, before attaching a new
sanding sheet.
The surface of the sanding pad (8) is fitted with a
hook-and-loop fastening, allowing sanding sheets
with a hook-and-loop backing to be secured
quickly and easily.
Press the sanding sheet (10) firmly onto the un-
derside of the sanding pad (8).
To ensure optimum dust extraction, make sure
that the punched holes in the sanding sheet (10)
are aligned with the drilled holes in the sanding
pad (8).
Selection of the Sanding Plate
The power tool can be fitted with sanding pads of
various hardnesses, depending on the applica-
tion:
– Extra soft sanding pad: Suitable for polishing
and sensitive sanding even on curved surfaces
– Soft sanding pad: Suitable for all sanding work,
universal application
– Hard sanding pad: Suitable for heavy sanding
on flat surfaces
Changing the Sanding Pad
Note: Replace damaged sanding pads (8) imme-
diately.
Remove the sanding sheet or polishing tool. Un-
screw the screw (11) completely and remove the
sanding pad (8). Attach the new sanding pad (8)
and retighten the screw so that it is finger-tight.
English
English
English
English | 27