Oregon Scientific EMR899HGN Manual Del Usuario página 9

TRANSMISSION COLLISION
Signals from other household devices, such as door bells, home
security systems and entry controls, may interfere with those of this
product and cause temporarily reception failure. This is normal and
does not affect the general performance of the product. The transmis-
sion and reception of temperature readings will resume once the
interference recedes.
NOTE ON
The unit of temperature display is selected on the
°C °F
Select for Centigrade or
Note that the remote temperature display on the main unit is
dominated by the selection on the ° C/ ° F slide switch of the
main unit. Whatever the display units of the remote sensors
are, they will be automatically converted to the chosen one of
the main unit.
LOW BATTERY WARNING
When it is time to replace batteries, the respective low-battery
indicator will show up when the respective channel is selected. The
battery level of the main unit will be shown on the indoor tempera-
ture when it is running low.
° °
C AND F
°C/°F
slide switch.
for Fahrenheit.
HOW TO USE THE TABLE STAND OR
WALL MOUNTING
The main unit has a retractable table stand, which when flipped open,
can support the unit on a flat surface. Or you can flip close the stand
and mount the unit on a wall using the recessed screw hole.
As for the remote unit, it comes with a wall-mount holder and a
removable stand. Use either to hold the unit in place.
Main unit
Wall-mount
Remote unit Wall-mount
9
Table Stand
Table Stand