Insert / Replace Batteries; Attaching Pressure Cuff - Lanaform TENSIOS1 Manual Del Usuario

INSERT / REPLACE BATTERIES

1. Follow the direction to remove the battery cover. (See figure 1).
2. Insert four 1.5V AA size alkaline batteries. The direction of batteries is as
indicated. (See figure 2).
3. Replace the battery cover.
4. When the "Low Battery Symbol" appears on the left bottom of the LCD screen,
please replace all four batteries. (See figure 3).
5. If the monitor will not be used for a long time, please remove all four batteries.

ATTACHING PRESSURE CUFF

1. Insert the air plug of the arm cuff into the air jack of the monitor.
2. The cuff should be assembled correctly when it is removed from the box. If it
is not, pass the end of the cuff furthest from the tubing through the metal D-
ring to form a loop. The smooth cloth should be on the inside of the cuff loop.
3. If the cuff is assembled correctly, the sewn hook material will be on the out-
side of the cuff loop and the metal D-ring will not touch your skin.
• 26 •