Matco Tools 124MATDS Manual De Instrucciones página 5

(4) Set the direction of rotation for the handle to the
forward position.
FORWARD
REVERSE
(7) Set the handle to the reverse position.
Use pressurized air to blow the chips from the work
piece. Ratchet the bolt die counter-clockwise to
remove the die from the workpiece.
124 PIECE AUTO MASTER
(5) Apply a small amount of
cutting oil to the work piece.
Ratchet the tool in
a clockwise direction.
Make sure the ratchet is
aligned with the work piece.
(6) Throughout the cut, use the
Rapid Select Ratchet to
quickly switch back and forth
between forward and reverse
to break up the chips for a
cleaner cut.
TAP AND DIE SET
(8) Clean the rest of the chips from the threads and
check your work with a threaded nut before
installing bolt. It may be necessary to apply a small
amount of oil or using a fine file to ease the edges
of the threads before installation.
c.) Storage
Apply a small amount of oil to the die and tap for
storage. Store the product in a cool, dry place. Ensure
that no condensation forms.
Page 5
124MATDS
1812422-14