Towing Products 82800 Instrucciones De Instalación página 4

9. Re-install the two bumper mounting nuts. See Illustration 9. Tighten all four nuts to 40 ft. lbs.
torque. Failure to tighten bolts as described may result in fastener loss or failure.
10. Use only a 5/8" diameter hitch pin with locking device to secure a ball mount
in this receiver.
For information regarding the installation of this product, go to: www.towingsupport.com
or Email us at: tech@towingsupport.com or Call our Technical Support Team at: 1-800-344-3230
This product complies with regulation V-5, C.S.A Standard D-264 and safety requirements for connecting devices
and towing systems of the State of New York
82800