Technical Specifications - Denver BTB-410 Guía Del Aparato

3.
Adjust the VOLUME on the unit or on the external device to increase or decrease the music volume to your desired level.
4.
Press and hold the PLAY/PAUSE/PAIR/SCAN button to disconnect Bluetooth.
Note: The Bluetooth works best within 10 meters in open air.
AUX-IN OPERATION
1.
Press the FUNCTION/
2.
Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN cable.(audio cable is not included)
Eng-4
Adjust the VOLUME on the unit or on the external device to increase or decrease the music volume to your desired level.
3.
Control the playback with your audio device.
MIC JACK OPERATION
Microphone input is available in all modes.
1.
Connect your microphone to the two 6.3mm MIC JACK on the unit.
2.
Rotate the MIC VOL. knob on the unit to increase or decrease the microphone volume.
3.
Press and hold the P-MODE/M./ECHO button to turn on or turn off the microphone echo effect.

Technical Specifications

GENERAL
Power Requirements
Power consumption
Power output
FM frequency
AUX in jack
Microphone jack
Work temperature
Bluetooth
Communication system
Reception Range
Compatible Bluetooth profiles
ACCESSORIES
Instruction Manual x 1pc
AC Cord x 1pc
Note: Specifications are subject to change for continuous improvement without prior notice.
Eng-5
button on unit to select the "AUX" mode.
AC100-240V~60/50Hz
33W
MAX 20W X 2
FM 87.5-108MHz
3.5mm
6.3mm
5°C - + 40°C
Bluetooth Standard version 2.1+EDR
10 meter (line-of-sight distance)
Advanced Audio Distribution Profile (A2DP)
4