Playing Music - JBL On TIME 200p Manual Del Usuario

Playing Music

1. Press Source button to select the source (iPod/iPhone, AM, FM, Aux).
2. Press "+" button to increase volume.
3. Press "–" button to decrease volume.
Languages/Region
1. Press the Menu/Up Level button until you reach the Top Menu screen.
2. Use Up/Down arrows to select Region and press Enter.
3. Use Up/Down arrows to select language. Press Enter.
4. Use Up/Down arrows to select radio band region type. Press Enter.
Radio Tuning
1. If AM or FM radio is already selected and playing, use Up/Down arrows to
tune frequency; hold either button and release to scan for the next station.
2. Otherwise, press Source until FM or AM is selected.
3. Tune to the desired frequency using Up/Down arrows; hold either button and
release to scan for the next station.
Setting Presets
1. While listening to AM/FM radio, press and hold Preset for 2 seconds.
The Radio Preset screen will be displayed.
2. Use Up/Down arrows to select slot to store preset. Press Enter to confirm.
Preset is stored!
To Select a Preset for Listening
1. Press Preset once at any screen to display the Preset list.
2. Use Up/Down arrows to highlight Preset. Press Enter to confirm. Preset station will begin playing!
0155CSK - JBL On Time 200P_v4 .indd 7
Power
Alarm
Source
Preset
Select Up
Menu/Up Level
Enter
Select Down
www.jbl.cOM 7
04/09/09 12:39:41