Using The Receiver Unit; Switching On The Receiver Unit; Selecting The Sound Volume; Selecting The Tone - Bellman & Symfon BE2210 Manual De Instrucciones

Using the Receiver Unit

Connect BE9122 Bellman Stereo Headphones, BE9159/BE9161 Bellman Neck
Loop, BE9125 Bellman Stetoclip, BE9124 Bellman In-ear Phones or another lis-
tening product recommended by Bellman & Symfon to the headphone output
(13) on the right-hand side as illustrated in the fold-out section of the manual.

Switching on the Receiver Unit

Press the On/Off button i (6). The Battery Status LED
(3) starts to shine with a green light to indicate that the
unit is on.

Selecting the sound volume

Use the volume control's + button (9) to increase and
the - button (10) to decrease the sound level. The
Volume and Tone LED Indicator (8) shows the sound
level. The more LEDs that are lit the higher the volume.
The LED indicator goes out 5 seconds after the sound
volume has been set.
62

Selecting the tone

Use the tone control's < button (11) to reduce and the
> button (12) to increase the treble in the tone. The
Volume and Tone LED Indicator (8) shows the selected
setting. The LED indicator goes out 5 seconds after the
sound quality has been set.
The Receiver Unit can be used as a small and adaptable self-contained call
amplifier, but together with the Transmitter Unit it opens up a whole new
range of possibilities. You can achieve the greatest flexi-bility when using the
Receiver Unit together with the Transmitter Unit.

Using the Transmitter Unit

Switching on the Transmitter Unit

Press the On/Off button i (18). The Battery Status LED
(17) starts to shine with a green light to indicate that
the unit is on.
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
63