Descargar Imprimir esta página

Saivod CTS6291 Instalación página 23

Campana extractora telescópica

Publicidad

Idiomas disponibles

Idiomas disponibles

outlets. Do not connect the hood to a fume, ventila-
tion or hot air duct. Confirm that room ventilation is
appropriate with the local authorities.
Make sure the maximum air extraction flow rate for
the appliances in the room does not exceed 4 Pa
(0.04 mbar).The room must have adequate ventila-
tion if an extractor hood is used simultaneously with
appliances that run on gas or other fuels. The evac-
uated air must be extracted through ducts that are
used for evacuating fumes from appliances that run
on gas or other fuels. Regulations regarding air ex-
traction must be complied with.
If the supply cord I damaged, it must be replaced by
the manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
Use a rigid PVC pipe with a min. Ø l20 mm to evacu-
ate fumes outside. The above restrictions do not
apply to hoods with no fumes outlet to
Outside (recirculation system with activated char-
coal filter).
Install the hood in line with the instructions on the
template provided.
F o r gas cooking appliances only: the minimum
GB
distance to the hood must be a t least 65 cm.
INSTALLATION
The cooker hood is supplied with
1 Spacer (F)
4 Screws
2 Bulbs
Close the space that remains between the hood
and the wall, adjusting the spacer (F).
Before completing any connection, make sure
the house voltage corresponds with the voltage in-
23

Publicidad

loading