Samsung S Pen Pro Manual Del Usuario página 476

Basics
• If there is a magnet near the S Pen, some S Pen actions, such as charging or tapping
the touchscreen, may not work.
• Even if the S Pen has been fully discharged, you can use other S Pen features, such as
tapping the touchscreen or the Air command features.
• If you use the S Pen at sharp angles on the screen, the mobile device may not
recognize the S Pen actions.
• If the S Pen is not working properly, take it to a Samsung Service Center.
Buttons and switch
Buttons and switch
Pen button
Connection button
Pen button +
Connection button
Mode switch
Status LED
Color
Flashes red → green →
blue in order
Flashes blue
Continuously red
Continuously green
Flashes red
If the status LED does not operate properly, reconnect the charger.
Function
• While pressing and holding the button, drag the S Pen over
text or item lists to select text or multiple items.
• Hover the S Pen over the mobile device's screen and press
the button to open the Air command panel.
• Press the button or wave the S Pen while pressing and
holding the button to launch the preset action.
• Press and hold the button to enter pairing mode.
• Press the button to switch the connection to another mobile
device signed in to the Samsung account.
• Press and hold the buttons simultaneously for more than
7 seconds to restart the S Pen.
• Set the switch to Z Fold to use the S Pen on the
Galaxy Z Fold3 5G.
Status
• Pairing mode
• Connected
• Charging
• Fully charged
• Battery power is low (lower than 5 %)
English (USA)
6
4