Piazzetta P220 T Serie Instrucciones De Instalación página 3

EN - Dear Customer,
We thank you for having chosen one of our products, the fruit of extensive and continuous research for a superior product in terms of
safety, reliability and performance.
In the documentation supplied, you will find all the information and advice you need to use your product as safely and efficiently as
possible.
IMPORTANT INFORMATION
a
Product installation, use and maintenance must be carried out in compliance with the applicable instructions provided by
the manufacturer and in compliance with all relevant regulations. Failure to respect the indications supplied and incorrect
interventions may cause situations of risk, health related problems or product faults.
Product installation and maintenance must be carried out exclusively by qualified personnel with sufficient knowledge of the
■
product itself.
- This instruction booklet has been prepared by the manufacturer and is an integral part of the product. In the event of sale or relocation
of the product make sure this booklet accompanies it, since the information contained in it is addressed to the purchaser and to
anyone involved in the installation, use and maintenance of the product.
- Read the instructions and the information, supplied in all forms together with the product and any accessories, as well as the
documentation referred to in this manual carefully, before proceeding with installation, use or any repairs. If any problems or doubts
should arise, please contact your local dealer or the authorized T.A.C. (authorized technical assistance centre).
- Gruppo Piazzetta S.p.A. cannot be held liable for situations of risk, defects, damage, product malfunctioning or for damage to objects,
people or animals resulting from tampering of the appliance and installation, use and maintenance which does not respect the
indications provided by regulations and the manufacturer.
d
It is forbidden any unauthorized modification of the appliance.
Do not install the product near walls or objects in heat-sensitive or combustible combustible material (wood or similar). It is
■
important to observe and respect the distances and safety indications prescribed by regulations and indicated in the manual
provided by the manufacturer.
- Check that the floor where the product will be installed is perfectly level.
- Take great care in handling the ceramic parts.
- When handling the steel parts of the cladding or the ceramic parts it is advisable to wear clean cotton gloves to avoid leaving
fingerprints that are difficult to remove at first time of cleaning.
- The cladding must be assembled by two persons.
- To compensate for any errors in levelness and unevenness, adhesive fibreglass tape is provided with the product.
- To verify the compatibility of structure, cladding and accessories, see the price list.
Manufacturer's note:
The stove has semi-refractory majolica cladding (not to be confused with other materials such as porcelain).
"Crazing", "dimples" or "blisters" on the glazed surface are aesthetic features of the material and in no way affect the functionality and
durability of the product.
The ceramic cladding is the result of exclusive craftsmanship; each ceramic piece is unique and any discrepancy in fit or alignment is due
to much of the product being hand made.
See the guarantee certificate enclosed with the product for the terms, limitations and exclusions.
In line with its policy of constant product improvement and renewal, the manufacturer may make changes without notice.
The product you have purchased may differ slightly from the one illustrated in this booklet since the pictures are only given as
an indication and not an exact portrayal.
This document is the property of Gruppo Piazzetta S.p.A. No part of it may be disclosed to third parties without the written
permission of Gruppo Piazzetta S.p.A. All rights reserved by Gruppo Piazzetta S.p.A.
DT2000338_H07035580_02
3