Cleaning And Descaling - Bartscher PRO II 40T Manual De Instrucciones Original


The coffee machine allows also for water heating. Fill clean tank with cold water, install
the riser pipe and clean filter basket. Turn the device on as for brewing coffee.

Switch the device to "O" as soon as the brewing cycle is ended.

Remove the plug when there are less than 4 cups in the water tank.
NOTE!
When the coffee machine is no longer used, remove the riser pipe, otherwise it
may become jammed in the heating bowl.

6. Cleaning and descaling

WARNING!
Before cleaning switch the device off with use of ON/OFF
switch and disconnect it from the power supply (pull the
plug!). Let the device to cool down.
Never clean the device with use of pressurized water jet!
Make sure that no water gets into the device.
CAUTION!
Never wash the device or its elements in the dishwasher.
Do not use any sharp objects or abrasive cleaning agents for surface
cleaning.
Daily cleaning
o Clean the device thoroughly before the first and all successive uses.
o Clean the filter basket, the riser pipe, and the lid with warm water and gentle
commercially available cleaning agent for professional coffee machines.
Follow the manufacturer's instructions.
o All washed parts should be rinsed with clean water to remove the washing agents
residuals.
o The water tank should be kept free from any deposits and coffee residuals. It may be
easily cleaned inside with use of gentle cleaning agent and dishcloth.
- 39 -