Grundfos G10-LON Instrucciones De Instalación Y Funcionamiento página 6

1. General
Before beginning installation procedures, these fitting instructions
should be studied carefully. The installation and operation should
also be in accordance with local regulations and accepted codes of
good practice.
The G10-LON interface is used for data transmission between a Local Oper-
ating Network (LON) and electronically controlled Grundfos pumps applying
the Grundfos bus protocol GENIbus.
For further information, see the documentation files on the floppy disk sup-
plied with the G10-LON interface.
2. Mounting
The G10-LON interface can for instance be mounted on the wall by means of
two screws according to the drilling plan below:
ø4
6
86 mm
ø4