Bluetooth Function; Technical Features - Trevi TT 1022 BT Manual Para El Uso Y La Conexión

ENGLISH
AMPLIFIER/ HI FI CONNECTION (if required)
LINE OUT
Whilst you can listen to your new turntable using the built in speakers you may wish to connect it to your existing
Hi Fi system. Connect the audio plugs to the Line input on your mixer or amplifier using an RCA cable (not supplied).
TURNTABLE
1. Set selector switch (4) to PHONO position;
2. Open the turntable door (11);
3. Select the correct disc speed (33/45/78 turns) using the turntable speed selector (7);
4. Place the disc on the plate. Use the supplied adapter (10) if the disc is 45 turns;
5. Release the arm from the locking hook; raise the tonearm using the lever (9) and position the stylus on the first
track of the record, use the lever (9) to very gently lower the head onto the record.
NOTES:
- Remove the turntable cap before use.
- Make sure that the arm is locked by the lock before and after use.
- Some discs may stop before the end, as the disc area does not match the settings of this unit. In this case, set the
AUTO STOP selector switch (8) to OFF. In this way, the disc will play back to the end but will not stop automatically.
ADVICE:
- We advise you to clean your records with an anti-static cloth to gain maximum enjoyment from them and to
make them last.
- We would also point out that for the same reason your stylus should be replaced periodically (approximately
every 250 hours).
- Dust the stylus from time to time using a very soft brush dipped in alcohol (brushing from back to front of the
cartridge).

BLUETOOTH FUNCTION

1. After turning on the device, turn the selector (4) to the BLUETOOTH position, the LED indicator (1) will begin to
flash;
2. Activate the Bluetooth function on the external device to be paired and start searching for devices;
3. Select the device "TT 1022 BT" and enter the password "0000" if requested;
4. Once pairing has been completed, a confirmation sound will be heard and the LED indicator light (1) will remain
steady;
5. Use the buttons of the external device to manage the functions.
HEADPHONE
Insert the headphone jack into the socket (2), the speakers will be disabled.
AUX-IN
Connect a cable with a 3.5mm jack plug to the AUX IN socket (12) and the other end to the external device.

TECHNICAL FEATURES

Power supply:
Power consumption:
Dimensions:
Precautions for correct disposal of the product.
The symbol shown on the equipment indicates that waste must be disposed of in "separate collection" and so the
product must not be disposed of together with urban waste.
The user must take the product to special "separate waste collection centres" provided by local government, or deliver
it to the retailer against the purchase of a new product.
Separate collection of waste and subsequent treatment, recycling and disposal operations promotes the produc-
tion of equipment with recycled materials and limits negative effects on the environment and on health caused by
improper handling of waste.
Illegal disposal of the product leads to the enforcement of administrative penalties.
..................................................
..................................................
..................................................
5V 1A
3W
375x 355x 120mm (L x W x H)
7
TT 1022 BT