Mopar 82214097 Instrucciones De Montaje página 3

3. Use a grease pencil to mark the position of the
hood latch on the radiator cross member.
Remove two (2) 10mm hex bolts from the hood latch
assembly.
4. Carefully pry back the radiator cover panel.
Disconnect and remove the hood latch release cable.
Remove the hood latch assembly.
5. Reconnect the hood latch release cable to the back of
new hood latch assembly. Position the new hood
latch (A) with the alignment marks and secure with
two (2) hex bolts. Tighten bolts to 11 Nm (8 ft. lbs.)
9/19/13
3