Mopar 82214097 Instrucciones De Montaje página 8

8
18. Remove four (4) fasteners from the bottom edge
and two (2) fasteners hidden in rubber bumpers on
the top edge of the glovebox surround. Disconnect
one (1) electrical connector on the right side of the
glovebox surround. Remove the glovebox surround
from the vehicle.
19. Locate the rubber grommet up under the dashboard
behind the glovebox. Remove the grommet.
20. From inside the engine compartment, feed the
switch harness (B) through the grommet hole and
into the passenger side footwell.
9/19/13