Lexmark X820e Manual Del Usuario página 10

2
Set up your printer
1
Place the high capacity feeder or
base cabinet on its back.
2
Remove the four screws attaching
the two stabilizer feet as shown.
Remove the stabilizer feet.
3
Return the high capacity feeder or
base cabinet to its upright
position.
4
Set up the drawer or high capacity
feeder, your printer, and any other
paper handling options except an
optional finisher. If you have a
finisher, attach it later. For
instructions on how to install these
items, refer to your printer Setup
Guide.
5
Verify the printer hardware setup
by printing the menu settings
page.
6
Unplug all power cords, fax and
phone cables, and network cables
from their electrical outlets. This
includes all cords and cables
attached to a computer, printer,
scanner, and any other
peripherals connected to an
outlet.
For