Oster BLSTPBRG Manual De Instrucciones página 14

BLADE & JAR ASSEMBLY
1. Place the blade into the threaded jar bottom (Figure 1).
2. Place the locking sealing ring over the blade (Figure 2). Carefully press and tuck the
sealing ring into the last groove of the threaded jar bottom.
3. Ensure the locking sealing ring is fully and evenly tucked in place and holding the
blade to the threaded jar bottom.
4. Turn jar upside down so the small opening is facing upwards (Figure 3).
5. Install the threaded jar bottom with blade and sealing ring onto the jar (Figure 4). Turn
to the right to tighten.
6. Be sure the threaded jar bottom with blade and sealing ring is tightened to the jar
before use.
7. Put the ingredients into the jar.
8. Place the lid and filler cap on the jar.
9. Place the jar onto the motor base (Figure 5).
10. Plug the power cord into a standard household outlet of the same voltage as the one
indicated in the rating plate of your blender. You are now ready to begin using your
blender!
Figure 1
Figure 5
BLSTPBRG_BLSTPBTG_21SEPM1 (LA).indd 5 BLSTPBRG_BLSTPBTG_21SEPM1 (LA).indd 5
Figure 2 Figure 3
Figure 6
E n g l is h -5
Figure 4
5/5/21 10:33 5/5/21 10:33