Ryobi RLM4852L Traducción De Las Instrucciones Originales página 14

EN
DE
FR DE ES IT
FR EN ES IT
Deutsch (Übersetzung der originalen Anleitungen)
view.
■ Keep work area clean.
■ Keep work area well lit.
■ Cluttered or dark areas invite accidents.
GARDEN TOOLS USE AND CARE
■ Before using, always visually inspect to ensure blades,
blade bolts, and cutter assembly are not worn or
damaged.
■ Replace worn or damaged blades and bolts in sets to
preserve balance.
■ Check all nuts, bolts, and screws at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
■ Check the grassbox
deterioration.
■ Replace worn or damaged parts.
■ Do not force the machine. It will do the job better and
safer at the speed for which it was designed.
■ Do not overload your mower. Mowing long thick grass
may cause the motor speed to drop, or the power to
cut out. When mowing in long thick grass a first cut
with the cutting height set higher will help reduce the
load. See adjusting the blade height.
■ Please note that cutting long grass will drain the
battery quicker than cutting shorter grass.
■ Stop the blade when crossing gravel surfaces.
■ Do not pull the mower backward unless absolutely
necessary. If you must back the machine away from a
wall or obstruction, first look down and behind to avoid
tripping or pulling the machine over your feet.
■ Stop the blade(s) if the machine has to be tilted for
transportation when crossing surfaces other than
grass, and when transporting the machine to and from
the area to be mowed.
■ Never operate the machine with defective guards
or shields, or without safety devices, for example,
deflectors and/or grassboxes, in place.
■ Switch on the motor according to instructions and
keep hands and feet away from cutting area. Keep
clear of the discharge opening at all times.
■ Never pick up or carry a lawnmower while the engine
is running.
■ Remove isolator key for the below cases:
● whenever you leave the machine
● before cleaning a blockage
● before checking, cleaning or working on the
machine
● after striking a foreign object; inspect the appliance
for damage and make repairs as necessary
PT NL SV DA NO FI
PT NL SV DA NO FI
English (Original instructions)
frequently for wear or
HU CS RU RO PL
HU CS RU RO PL SL
● before clearing the grassbox
● if the machine starts to vibrate abnormally (check
immediately)
● when not in use and storing the machine
● when recharging and removing/inserting battery
pack
■ Avoid holes, ruts, bumps, rocks, property stakes, or
other hidden objects. Uneven terrain could cause a
slip and fall accident.
■ If the machine should start to vibrate abnormally,
stop the motor and check immediately for the cause.
Replace the blade if it is unevenly worn or damaged in
any way. Vibration is generally a warning of trouble.
■ If the machine strikes a foreign object, follow these
steps:
● Stop the machine by releasing the power lever,
wait until the blade comes to a complete stop, and
then remove isolator key.
● Thoroughly inspect the machine for any damage.
● Replace the blade if it is damaged in any way.
Repair any damage
continuing to operate the mower.
● Use the right appliance. Do not use the machine
for any job except that for which it is intended.
■ When not in use, mower should be stored in a well-
ventilated, dry, locked up place-out of the reach of
children. The isolator key should also be removed.
■ Follow manufacturer's instructions for proper operation
and installation of accessories. Only use accessories
approved by the manufacturer.
SERVICE
■ Service on the product must be performed by qualified
repair personnel only. Service or maintenance
performed by unqualified personnel could result in a
risk of injury to the user, or damage to the machine.
■ Use only identical replacement parts when servicing
the product. Use of unauthorised parts may create
a risk of serious injury to the user, or damage to the
product.
NOTE: Only perform the tasks listed in this manual. For
other service or repair, it should be done by a qualifi ed
person.
BATTERY RULES FOR SAFETY
■ Battery operated units do not have to be plugged
into an electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
even when unit is not operating.
■ Remove the battery pack before making any
adjustments, cleaning, or removing material from the
unit.
■ Ensure the isolator key is removed before inserting
14 14
SL HR ET LT LV SK BG
HR ET LT LV SK BG
before restarting and