NEO ION 440 Manual De Usuario página 13

5. DMX CONNECTION AND DMX PROTOCOL
DMX addressing
The device is controlled by universal DMX 512 pro-
tocol, DMX address is the start channel used to re-
ceive instructions from the external controller. For
independent control, each fixture must be assigned
its unique address control channels. For example,
this device has four channel modes: 31/32/18/20,
if we set the mode at standard 31 channels mode,
and there are several models need to be inde-
pendently controlled, we just simply address first
Connection: use DMX cable with 5 pin XLR-plugs
to connect the controller with the fixture or one
fixture with another.
fixture at 1, and second fixture at 32, third one at
63, etc.
If the devices have the same address, they will
behave synchronically.
DMX addressing is limited, don't set the address
so high that without enough control channels
for the fixtures. Display is flashing when no DMX
signal is received.
P. 13
English version - Neo ION 440