JBL On Stage III Manual Del Usuario página 5

jbl On Stage III remote easy setup guide
Volume Down
iPod Play/Pause 1
iPod Previous/Rewind
iPod Scroll Up
iPod Menu
MENU
1 In the battery-only mode, the JBL On Stage III loudspeaker dock will
turn off to save battery power when muted or paused for longer than 10
minutes.
JBL 10-Button Remote Technical
Specifications
Transmission:
Frequency:
Operating Range:
Battery Type:
Dimensions:
Width:
Height:
Depth:
Weight (including battery):
Volume Up
Mute/Unmute
1
iPod Next/Fast Forward
iPod Scroll Down
iPod Select/Enter
IR
38kHz
20 feet
CR2025 3V
1.29 (33mm)
||
3.38 || (86mm)
0.23 (6mm)
||
1.2 oz.
Navigation Control Mode
Turn iPod on: Press any button on the remote control to wake the iPod.
Turn iPod off: Press and hold the Play/Pause button for two seconds.
Bring up iPod menu: Press the Menu button.
Scroll up: Press the Scroll Up button.
Scroll down: Press the Scroll Down button.
Go to previous menu: Press the Menu button.
Select menu/track/feature: Press the Select button.
Music Control Mode
Play a track: Press the Play/Pause button.
Note: If the iPod is at the Main Menu, pressing
Play/Pause will cause the iPod to start playing all of
its music.
Pause a track: Press the Play/Pause button while a song is playing.
Skip to next track: Press the Next/Fast Forward button.
Skip to previous track: Press the Previous/Rewind button.
Fast-advance track: Press and hold the Next/Fast Forward button.
Fast-reverse track: Press and hold the Previous/Rewind button.
Increase volume: Press the Volume Up button.
Decrease volume: Press the Volume Down button.
Mute: Press the Mute/Unmute button.
Go to previous menu: Press the Menu button.
Select menu/track/feature: Press the Select/Enter button.
2 In the battery-only mode and after 10 minutes of mute or paused play,
you will need to power on the JBL On Stage III unit using the power
button located on the back of the unit.
5
2
2