Installation
STEP 2 Flooring
NOTE
If the refrigerator cannot pass through entrance to your home or kitchen due to its size,
see Door removal for entrance on page 18.
28
English
Untitled-4 28
• The surface of the installation location
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard under each leg of the
refrigerator when you move it for
installation.
• To protect the floor once the
refrigerator is in its final position, do
not move it unless necessary. If you
have to move it, place thick paper or
cloth such as an old carpet, along the
movement path.
2016-01-14
11:41:09