Digital I/O - Exlar EXP-24 Manual De Instalación Y Servicio

Digital I/O

Inputs
The Digital inputs and Outputs are isolated from the motor and logic power supplies as well as PE. The
voltage for the I/O must be supplied by an external 24 V DC supply. The functions of the I/O are fully
programmable and setup on the I-O page of the Expert Software
Inputs
The EXP-24 provides two digital inputs, Input 1 and Input 2, each input consists of a signal line and a
return line.
Function
Input 1
Input 1 Return
Input 2
Input 2 Return
Description
Input Voltage Range
On state voltage range
Off state voltage range
Isolation from PE and Supply
EXP 24 Manual
PN 47676
Revision H
Terminal
J28
J29
J26
J27
Specification
0 to 32 VDC
15.0 -32 VDC
0-10 VDC
500 V DC
+ 24 V
Input 1 or 2
Input 1 or 2 Return
Digital Input Circuit
50
1/9/14
Exlar Corporation
952-500-6200