Re-Attaching The Refrigerator Doors - Samsung RF25HMEDBSR/AA Manual Del Usuario

5. Remove the screw ( 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 9 ) attached to the lower left and right door
hinges with an allen wrench (3/16"). Remove
the lower left and right door hinges ( 10 ).
RE-ATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its fi nal location, assemble the parts
in reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
Type A Type A
Center of Transparent coupler Center of Transparent coupler
DA68-02952A-06.indb 12 DA68-02952A-06.indb 12
10
8
9
Allen wrench Allen wrench
Type B Type B
Dispenser Dispenser
The Guide Lines The Guide Lines
English - 12
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2. Take off the cover ( 2 ) w/harness with a flat-
blade screwdriver (-).
2
3. Press the locking tab and separate the Wire
Connector.
CAUTION
When reassembling it, be sure to connect the wire
harness.
If it is not connected, the Flex Room does not
work.
1
2015. 4. 23. 2015. 4. 23. 7:53 7:53