LaserLiner MetalliFinder Pro Manual De Instrucciones página 6

a
b
c
d
e
f
3 2
4 9 7
Operation
1. Battery exchange:
Open the battery compartment on the back of the tool and
connect up a new 9V battery (type 6LR 61). If the symbol 8.)
appears in the display, you should replace the battery as soon
as possible.
2. Switching-on and detection:
The MetalliFinder Pro can detect metals up to a depth of
75 mm and also localise live wires. For safety reasons, the AC
voltage warning is always active. The „Voltage (AC) found"
LED (b) lights up if a live line is located within the measuring
range.
06
GB
1 5
8 6
Operating elements
a LED Measuring centre
b LED „Current (AC) found"
c Set button: Change over
material types – iron pipes,
structural steel, copper pipes.
d ON/OFF button/
Toggle between scan modes:
AC voltage search,
metal search
e Calibration button
f Back: Battery cover
LC-Display
1 Symbol:
AC Search activated (AC)
2 Symbol Metal Search:
iron pipes activated
3 Symbol Metal Search:
structural steel activated
4 Symbol Metal Search:
copper pipes activated
5 Calibration symbol (CAL)
6 Symbol: Auto-test completed
(READY)
7 Symbol: Auto-test error (ERROR)
8 Low battery display
9 Depth display in mm,
bar display