ISO DIN radio provision with pocket
1. Choose the appropriate bracket
set for your application, then cut
and remove the tabs not necessary
for your application.
(Figures A.1 and A.2)
2. Secure the modified brackets to
the radio housing with the (4) 3/8"
Phillips screws provided. (Figure B)
3. Remove the metal "DIN" sleeve and
trim ring from the aftermarket radio.
4. Slide the radio into the bracket/
housing assembly and secure using
the screws supplied with the radio.
(Figure B)
5. Locate the factory wiring harness
and antenna connector in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
Rogue (all)
Rogue Select
(Figure A.1)
(Figure B)
99-7613
Bracket A
Versa 2007-2011
Rogue (all)
Rogue Select
(Figure A.2)
6
Bracket B
Juke
Versa 2012-2013
Versa S, Versa S+ 2014
Juke